diff --git a/README.md b/README.md
index 4f400ca..8ebba30 100644
--- a/README.md
+++ b/README.md
@@ -31,15 +31,75 @@ The main goals of this project are:
 
 ## Prerequisites
 
-- A server running Ubuntu or some other Debian-based distribution and working SSH access
+- A server running Ubuntu or some other Debian-based distribution and working SSH access. (To try SATT in a local virtual machine, check out the Quickstart with Vagrant below)
 - Ansible on another computer that will send SSH commands to the target server to provision it
 
-## Quickstart: Vagrant
+## Quickstart: Vagrant <a id="#quickstartVagrant"></a>
+
+To give SATT a quick spin, you could easily bootstrap a development VM using Vagrant on your local machine.
+
+### Vagrant + Ansible on Windows 10 using Windows Subsystem for Linux
+
+1. [Download](https://www.virtualbox.org/wiki/Downloads) and install Virtualbox ([Documentation](https://www.virtualbox.org/wiki/End-user_documentation))
+
+1. Follow the [guide to install the Windows Subsystem for Linux](https://docs.microsoft.com/en-us/windows/wsl/install-win10), we recommend to choose Ubuntu 18.04 LTS or later as a distribution.
+
+1. Open Ubuntu through the Windows Start Menu
+
+1. Inside the Ubuntu Terminal, continue the setup by following the next section.
+
+### Vagrant + Ansible on Linux
+
+1. Obtain Vagrant by [downloading the corresponding package](https://www.vagrantup.com/downloads.html) for your distribution, assuming Ubuntu in the next steps.
+
+2. Install the package by opening a Terminal and run:
+    
+    ```bash
+    user@vmhost: ~$ sudo dpkg install <vagrant-package-name>.deb
+    ```
+
+3. To check whether Vagrant was installed successfully, try running `vagrant --version` which must not return an error.
+
+4. Recommended: Install the [Vagrant::Hostsupdate](https://github.com/cogitatio/vagrant-hostsupdater) plugin that will automatically add the hostname of the virtual machine to the list of static hosts on your local machine (VM host). This allows you to later open e.g. `nextcloud.satt.local` in a browser from your local machine. Updates to the hosts file will require entering a sudo password:
+
+    ```bash
+    user@vmhost: ~$ vagrant plugin install vagrant-hostsupdater
+    ```
+
+    **Note for VM host Windows 10 with WSL:** This host update will currently have no effect outside of WSL, as the updated hosts file is only used within the WSL context, not Windows itself.
+
+5. Install Ansible:
+
+    ```bash
+    user@vmhost: ~$ sudo apt update && sudo apt upgrade
+    user@vmhost: ~$ sudo apt install python3 python3-pip
+    user@vmhost: ~$ pip3 install --user ansible
+    ```
+
+6. Test ansible by running `ansible --version`
+
+7. Clone the SATT repo:
+
+    ```bash
+    user@vmhost: ~$ git clone https://git.jotbe.io/jotbe/ansible-selfhosted-services.git
+    ```
+
+8. Change to the local copy and try bootstrapping the VM (this will take a while and you might be asked for a sudo password):
+
+    ```bash
+    user@vmhost: ~$ cd ansible-selfhosted-services
+    user@vmhost: ~/ansible-selfhosted-services$ vagrant up
+    ```
+
+9. If everything went fine, you should be able to SSH into the machine by running `vagrant ssh` from within the same directory and services should be up and running.
+
+10. If you installed the Vagrant::Hostsupdate plugin in step (4) and didn't change the configuration, you should be able to open some services in a browser:
+    
+    * Nextcloud: [https://nextcloud.satt.local](https://nextcloud.satt.local)
+    * Jitsi: [https://jitsi.satt.local](https://jitsi.satt.local)
 
 By default, a `vagrant` user will be provisioned (if not already available) and used throughout the provisioning.
 
-**TODO: Provide Vagrantfile and further documentation!**
-
 ## Quickstart: Regular server/VM
 
 - Clone this repo
diff --git a/Vagrantfile b/Vagrantfile
new file mode 100644
index 0000000..7018500
--- /dev/null
+++ b/Vagrantfile
@@ -0,0 +1,62 @@
+# This guide is optimized for Vagrant 1.8 and above.
+# Older versions of Vagrant put less info in the inventory they generate.
+Vagrant.require_version ">= 1.8.0"
+
+require 'etc'
+
+Vagrant.configure(2) do |config|
+
+  config.vm.box = "hashicorp/bionic64"
+
+  # The currently only supported provider is Virtualbox
+  # You will have to install Virtualbox from https://www.virtualbox.org
+  # Manual for the following settings: https://www.virtualbox.org/manual/ch03.html
+  config.vm.provider :virtualbox do |vbox, override|
+    vbox.customize ["modifyvm", :id, "--name", "Self-host All The Things! - Dev VM"]
+    # Amount of virtual memory
+    vbox.customize ["modifyvm", :id, "--memory", 8192]
+    # Amount of virtual CPUs, by default it uses half ot the physical CPUs
+    vbox.customize ["modifyvm", :id, "--cpus", Etc.nprocessors/2]
+    # The amount of graphics memory
+    vbox.customize ["modifyvm", :id, "--vram", 128]
+    # If you want to use the 3D graphic acceleration in the VM, turn it on
+    vbox.customize ["modifyvm", :id, "--accelerate3d", "off"]
+    # Required. Allows to use more than 16 IRQs, important esp. for 64-bit guests and if more than 1 virtual CPU is used
+    vbox.customize ["modifyvm", :id, "--ioapic", "on"]
+    # Enable copy & paste between the VM and the host
+    vbox.customize ["modifyvm", :id, "--clipboard-mode", "bidirectional"]
+    # Disable serial ports (COM) if not needed
+    vbox.customize ["modifyvm", :id, "--uartmode1", "disconnected"]
+    # If your local network uses the same subnet as the default Virtualbox one (10.0.2.0/24), set a different one here
+    vbox.customize ["modifyvm", :id, "--natnet1", "10.0.50.0/24"]
+    # Attach a virtual DVD drive to be able to easily install the Virtualbox Guest Additions
+    vbox.customize ["storageattach", :id, "--storagectl", "IDE Controller", "--port", "0", "--device", "0", "--type", "dvddrive", "--medium", "emptydrive"]
+    #vbox.customize ["storagectl", :id, "--name", "SATA Controller", "--hostiocache", "on"]
+    # Default: The VM is hosted on an SSD.
+    # Set to "off" if it is hosted on an HDD to enable performance optimizations for rotational drives (e.g. defragmentation):
+    #vbox.customize ["storageattach", :id, "--storagectl", "SCSI", "--port", 0, "--nonrotational", "on"]
+    #vbox.customize ["storageattach", :id, "--storagectl", "SCSI", "--port", 1, "--nonrotational", "on"]
+
+    # Set to true, if you intent to use a GUI
+    vbox.gui = false
+  end
+
+  config.vm.define "satt" do |dev|
+    dev.vm.hostname = "satt.local"
+    dev.hostsupdater.aliases = ["nextcloud.satt.local", "jitsi.satt.local"]
+    # An additional IP that allows you to access the VM and its services from the VM host.
+    # If you change this IP, you will have to modify the `ansible_host` in the inventory file correspondingly.
+    # More information about the various network modes:
+    # https://www.virtualbox.org/manual/ch06.html#network_nat_service
+    dev.vm.network :private_network, ip: "192.168.23.42"
+
+    dev.vm.provision :ansible do |ansible|
+      #ansible.verbose = "vvv"
+      ansible.compatibility_mode = "2.0"
+      ansible.playbook = "./site.yml"
+      ansible.inventory_path = "./inventory.ini.sample"
+      ansible.become = true
+    end
+  end
+
+end
\ No newline at end of file
diff --git a/group_vars/vagrant.yml b/group_vars/vagrant.yml
new file mode 100644
index 0000000..0c43b68
--- /dev/null
+++ b/group_vars/vagrant.yml
@@ -0,0 +1,34 @@
+ansible_user: vagrant
+users:
+  - deploy
+sudoers: []
+mariadb_root_password: password
+nextcloud_mariadb_user: nextcloud
+nextcloud_mariadb_password: password
+nextcloud_admin_user: admin
+nextcloud_admin_password: password
+nextcloud_trusted_domains: satt.local
+nextcloud_overwrite_cli_url: https://nextcloud.satt.local
+nextcloud_overwrite_host: nextcloud.satt.local
+nextcloud_overwrite_protocol: https
+nextcloud_enable_restic_compose_backup: False
+nextcloud_virtual_host: nextcloud.satt.local
+collabora_virtual_host: collabora.satt.local
+collabora_domain_regex_pattern: nextcloud\.satt\.local
+collabora_admin_user: admin
+collabora_admin_password: password
+jitsi_public_url: https://jitsi.satt.local
+jitsi_docker_host_address: "{{ ansible_host }}"
+jitsi_exposed_http_port: 8000
+jitsi_exposed_https_port: 8443
+jitsi_timezone: Europe/Amsterdam
+jitsi_enable_letsencrypt: False
+jitsi_virtual_host: jitsi.satt.local
+docker_user: deploy
+traefik:
+  expose_internally: True
+  expose_externally: False
+  enable_acme: False
+  use_acme_staging: False
+  dns_challenge_provider: False
+
diff --git a/inventory.ini.sample b/inventory.ini.sample
index 880b6bf..ad44fb8 100644
--- a/inventory.ini.sample
+++ b/inventory.ini.sample
@@ -1,20 +1,23 @@
 # All hosts
-vagrant ansible_user=vagrant
+satt ansible_user=vagrant ansible_host=192.168.23.42
+
+[vagrant]
+satt
 
 [docker]
-vagrant
+satt
 
 [ubuntu]
-vagrant
+satt
 
 [debian:children]
 ubuntu
 
 [nextcloud]
-vagrant
+satt
 
 [jitsi_docker]
-vagrant
+satt
 
 [collabora]
-vagrant
+satt